LOC Precision Flying Model Rocket Kit 4" AIM-54C Phoenix LOC LCPHX4 Special Order
LOC 4" Phoenix - At 42.5″ tall, all the custom laser cut components are included in the box to build it strong and legit! Featuring factory pre-slotted airframe, through-the-wall fin construction and high power motor capabilities. The Phoenix is a fantastic jump into high power. This version sports a 38mm motor mount and will accept 29mm adapters (sold separately). Multi-Slot fins, decals, rail guides and recovery are standard. Flies on G-H-I motors. *using larger motors MAY require the addition of nose weight! ALWAYS sim your specific build before flight!
Polyethylene Enhanced Nose Cone
Nylon Parachute Recovery 36"
4" Preslotted Air Frame
38mm Motor Mount
Laser Cut Rings and Fins
Rail Guides
Complexity: Intermediate
Diameter: 4″
Height: 42.5"
Weight: 3lbs
Shock Cord Type: NW-15 15' 3/8″ Nylon with sewn loops
Shock Cord Mount: SCM-3 Eyebolt
Fin Thickness: 1/8″
Ring Thickness: 1/8″ x3 - 1/4" FWD x1
Instructions
Decals Included - see pic for details - not all decals shown on the model are included
Skill Level 5 Pro - Intermediate
A Level 1 or 2 certification is required to fly this model due to weight and/or motor size
Recommended Engines:
38mm H,I: H123-8(1450'), I211-10(3100')
29mm G,H (with Adapter): G80-7(1000'), H128-7(1150')
Maximum apogee 4800ft
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
Pro - High Power Rocketry
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
