LOC Precision Flying Model Rocket Kit 3.1" IRIS 38mm YIRIS3-38
IRIS 3.1" Sport Scale version of the IRIS sounding rocket.
One of the ADVANCED SERIES of kits, which include factory pre-slotted airframe and through-the-wall fin construction or wedge fin attachment, the PK-33 is a 38mm motor sport version of the famous IRIS rocket. It can attain altitudes over a mile on large motors or fly well in a small field using 29mm G motors with optional MMA-2 adapter. IRIS is a great introduction into Level 1 flying. Parachute Recovery!
All LOC PRECISION kits include heavy duty airframe and motor mount tubes, high-grade precision-cut plywood fins, centering rings, rip-stop nylon parachute or streamer, nylon elastic shock cord and mount, launch lug, polypropylene nose cones and instructions.
Decal is not included but available by special order
Skill Level: 4
Specifications:
Length: 55.25 in.
Diameter: 3.1 in.
Weight: 30 oz.
Recovery: 36" Parachute
Recommended Engines:
38mm
G,H,I
MMA-2 Motor Mount Adapter required to fly with 29mm motors
Maximum apogee 5800 ft
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
