LOC Precision Flying Model Rocket Kit 2.63" AGM-78 Standard ARM TWT-SARM26
Includes Pre-Slotted Airframe for Thru the Wall Fin Construction
Laser Cut 1/8" Plywood Fins and Centering Rings
24″ Rip-Stop Nylon Parachute and Swivel
Kevlar Shock Cord Mount
Elastic Shock Cord
Starter Fire Protection Blanket
1/4″ launch lugs
Vinyl Decals
Assembly Required Skill Level: Pro Intermediate
Specifications:
Length: 34 in.
Diameter: 2.63 in.
Weight: 14 oz.
Recommended Engines:
29mm motors
D15-4 200'
E15-7 700'
F40-9 1500'
G33-10 1900'
Maximum Projected Altitude 1790'
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
