null
Estes Flying Model Rocket Kit Tazz  EST 7282

Estes Flying Model Rocket Kit Tazz EST 7282

(No reviews yet) Write a Review
Now: $18.74
Was: $24.99
SKU:
EST 7282
UPC:
UPC047776072824
Availability:
Ships same or next day
Shipping:
Calculated at Checkout
Skill Level:
3 Advanced
Motor Mount Size:
18mm

Estes Flying Model Rocket Kit Tazz   EST 7282

A re-imagining of an Estes classic! Based on the Estes Gyroc of the 60s, the TAZZ is an awesome addition to any rocketeers collection. Launch it up to 700 feet on a C6-3 engine and watch as it spins back down to earth!

Based on the vintage Estes Gyroc of the late 60s, this new and improved version, the TAZZ, features the same whirlybird spin recovery system of the original. When launched with an Estes C6-3 engine, the TAZZ can reach heights of 700 feet. At apogee, the engine pod is pushed out, activating the ailerons (small-hinged fins) which then start the TAZZ in its spiral descent. A bright orange streamer helps track and recover the engine pod, while onlookers will watch in awe at the TAZZ’s unique and exciting spin back down to earth. Streamlined and nearly twice as long as the original, the new TAZZ is big and exciting to watch. It is sure to be a big hit at any local launch site.

Assembly Required Skill Level 3 Advanced

Recovery System 18 in. (45.7 cm) Streamer, Spin

Length 16.6 in. (42.2 cm)

Wingspan 7 in. (17.78 cm)

Diameter 0.98 in. (25 mm)

Estimated Weight 1.3 oz. (36.9 g)

Plastic Nose Cone

Laser Cut Wood Fins

Decal Type Waterslide

Launch Rod Size 1/8"

Approximate Build Time 2 Hours  Download Instructions

Recommended Engines A8-3, B6-2, B6-4, C6-3

Projected Max Altitude 700 ft. (213 m)

 

Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife

Ruler

Wood Glue, Model Cement or CA(Super Glue)

Sandpaper

Masking Tape

Finishing Supplies like:

Wood Filler

Sealer/Primer

Paint

Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code

 

Full one year warranty through manufacturer