Estes MIRV 2134 - Out of Production
Enter the world of Multiple Re-Entry Vehicles with the Estes MIRV. The angular design of the model allows three independently powered rockets to separate from the booster which then climb to out of site flights. This model includes light weight foam, specially molded plastic parts and laser cut balsa fins. Recovery of the three upper stages is by “High Drag Recovery” which allows them to float gently back to Earth.
Technical Specifications Skill Level 3
Length: 24.5 in. (62.2 cm)
Diameter: 1.64 in. (42 mm)
Estimated Weight: 4.7 oz. (134 g)
Laser Cut Balsa Fins, Waterslide Decals, Parachute Recovery
Recommended Engines: Booster - B6-0 (First Flight), C6-0, Second Stage - A10-3T only
Projected Max Altitude: 600 ft. (183 m)
Model Rocket Kits are rated by Skill Level
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Wood Glue, Model Cement or CA(Super Glue)
Finishing Supplies like:
Launching Equipment and Supplies like:
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html