Categories
Categories
Brands
Brands
- Home
- Estes Rocket Kits
- Estes Flying Model Rocket Kit EMP 010 7216 OOP **
- Home
- Estes Rocket Kits
- Skill Level 3
- Estes Flying Model Rocket Kit EMP 010 7216 OOP **
- Home
- Skill Level
- Skill Level 3 Advanced
- Estes Flying Model Rocket Kit EMP 010 7216 OOP **
Estes Flying Model Rocket Kit EMP 010 7216 OOP **
Product Description
Estes Flying Model Rocket Kit EMP 010 7216
The EPM-010 features swept forward fins with outer navigational pods for interplanetary space travel. Its long slender design will reward you with straight, outta-site flights. This hot looking rocket floats back to earth on a preassembled 12 inch parachute. Standard Engine powered, the EPM-010 soars over 900 feet!
Skill Level 2
Length: 35.25 in. (89.5 cm)
Diameter: .98 in. (25 mm)
Estimated Weight: 2.4 oz. (68 g)
Laser Cut Wood Fins, Waterslide Decals, 12 in. (30.5 cm) Parachute Recovery
Recommended Engines: B4-4, B6-4 (First Flight), C6-3, C6-5
Projected Max Altitude: 925 ft. (282 m)
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code