Estes Flying Model Rocket Kit Boxed Ghost Chaser™ 7300
(Formerly Easy to Assemble)
The hauntingly beautiful Ghost Chaser is a deceptively simple rocket that packs in a lot of fantastic features. Designed as an easy-to-build, snap-together, Beginner-Level kit, this model goes together quickly and easily in the hands of even the newest rocketeer. In no time you’ll have a finished Ghost Chaser standing nearly two feet tall with its striking silvery white main body tube and clear, five-inch payload section. A sleek transition separates the two tubes, reducing the rocket body from a standard 18mm BT20 to a svelte 13mm BT5. The blue translucent fins almost seem to glow when the light hits them. Shine that light through the semi-transparent engine mount, nosecone, and the mid-body transition and watch them glow eerily in blue, too.
Since all Ghost Chaser components are pre-finished, there’s no sanding or painting required. A clever system of slots, tabs and clips (and a well knotted shock cord) holds this no-muss, no-fuss model together without a drop of glue. Finish off this fanciful flyer with the included sheet of cool, custom sick-on decals. The Ghost Chaser looks great almost straight from the box. You’ll have an amazing and functional flying model rocket in a flash!
Launching the Ghost Chaser is as straightforward as the build. The threaded engine mount makes loading and changing engines a breeze. The rocket flies on a range of Estes A through C engines, so you have all the options you’ll need for multiple field sizes and wind conditions. Look for a peak altitude of 1100 feet on an Estes C6-5 engine. How will you use the tall payload compartment that tops this high-flyer? Will you conduct tests on the effects of rapid acceleration on various objects? Or will you just launch something cool skyward? However you use the cargo section, be ready to track your Ghost Chaser back to ground level after ejection and deployment of the 12-inch parachute. And the best part? Recovery, reload and launch again!
WHAT YOU NEED TO BUILD: Snap together construction. Clear tape and a pen or pencil may be needed. (Tools, construction and finishing supplies not included.)
WHAT YOU NEED TO LAUNCH (sold separately): Estes Porta-Pad II Launch Pad with a 1/8 inch launch rod and Electron Beam Launch Controller, Estes model rocket engines, starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).
Skill Level 1 Beginner
A8-3, B4-4, B6-4, C6-5, C6-7Projected Max Altitude
1100 ft. (335 m)Recovery System
12 in. (30.5 cm) ParachuteLength
23 in. (58.4 cm)Diameter
0.98 in. (25 mm)Estimated Weight
1.8 oz. (51 g)Estimated Assembly Time
20 Minutes (painting and glue drying time not included)Fin Materials
Porta-Pad II Launch Pad and Electron Beam Launch ControllerLaunch Rod Size
Estes model rocketry is recommended for boys and girls ages 10+ with adult supervision for those under 12, and rocketeers of all ages.
Model Rocket Kits are rated by Skill Level
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Wood Glue, Model Cement or CA(Super Glue)
Finishing Supplies like:
Launching Equipment and Supplies like:
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code