null
Estes Flying Model Rocket Kit Baby Bertha  EST 1261

Estes Flying Model Rocket Kit Baby Bertha EST 1261

(No reviews yet) Write a Review
$15.99
SKU:
EST 1261
UPC:
UPC047776012615
Availability:
Ships same or next day
Shipping:
Calculated at Checkout
Skill Level:
1 Beginner
Motor Mount Size:
18mm

Estes Flying Model Rocket Kit Baby Bertha 1261

A miniature version of one of the most popular kits of all time, the Big Bertha. There's nothing childlike about the Baby Bertha! It's fun to build and decorate. Baby is a special, high-flying member of the Bertha family.

The Baby Bertha is a half-sized version of one of Estes’ most popular rockets, the Big Bertha. The Baby Bertha stands just 13 inches making it an ideal Intermediate building experience. High performance and easy to build is this model rocket.

The Estes Baby Bertha requires assembly and can be built and finished in just a few hours. You can paint it like the package or create your own Go Wild design! The kit features the distinctive looking laser cut wood fins, a blow molded nose cone and easy to apply self-stick decals. When powered with Estes standard model rocket engines, it can streak to over 575 feet and is easily recovered with a colorful 12 inch parachute.

Complete your set of Berthas with the addition of this mini missile today!

Skill Level 2 Intermediate

Length: 12.75 in. (32.4 cm)

Diameter: 1.64 in. (41.7 mm)

Weight: 2.1 oz. (58.2 g)

Laser Cut Balsa Fins

Water-slide Decals

Parachute Recovery

1/8" Launch Lug

Estimated Assembly Time 1 Hour (painting and glue drying time not included)

Recommended Engines: A8-3, B4-4, B6-4, C6-5

Max Altitude: 700 ft. (213 m)

 

Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife

Ruler

Wood Glue, Model Cement or CA(Super Glue)

Sandpaper

Masking Tape

Finishing Supplies like:

Wood Filler

Sealer/Primer

Paint

Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code

 

Full one year warranty through manufacturer