- Skill Level
- Skill Level 2 Intermediate
- ASP Flying Model Rocket Kit Thermal Seeker 13 Streamer Duration ASP KTSS-13
ASP Flying Model Rocket Kit Thermal Seeker 13 Streamer Duration ASP KTSS-13
This kit features a lightweight vac-form plastic cone, quality spiral-wound body tube, shock cord made of DuPont KEVLAR® & thin G10 fiberglass fins. Each of the Streamer Duration kits include our "Hang Time™" Tracing Paper Streamer Kits with enough materials to construct two streamers. The streamer size included with each kit is a good all - around size for the model size, but you may want to use a larger or smaller size depending on flying conditions. Be sure to check out other sizes of tracing paper streamers and the Silver Dura-Lar streamers for more options!
Click here for an article that provides some tips on using our Tracing Paper streamers in competition models.
Length: 10.2"/25.9 cm
Diameter: .541"/13.74 mm
Approx. Weight (w/out recovery device): 0.25 oz/7 gm
Recommended Engines: 1/4A3-3T; 1/2A3-2T; 1/2A3-4T; A3-4T
Skill Level: Beginner/Intermediate
Recovery Device: Streamer (4" X 40" Tracing Paper)
What you'll need to build this rocket:
Adhesives – thin viscosity cyanoacrylate ("CA") glue; hobby knife with a sharp #11 blade; sandpaper (medium - 220 or 280, fine - 320 or 400, & [optionally] extra fine - 500 or 600); pencil.
Recommended, but not required: sanding block; extender tip for cyanoacrylate glue.
Optional: accelerator for cyanoacrylate glue.
What else you'll need to fly this rocket:
Engines (see list above); Recovery Wadding; Electronic Launch System and Launch Pad