Aerotech Flying Model Rocket Kit Initiator System Package AER 89001
The Initiator Systems Package is your basic introduction to big hobby rocketry. This comprehensive kit contains everything necessary to fly the larger stuff! The starter kit includes the Initiator rocket kit, Mantis launch pad kit, Interlock launch controller kit and complete easy-to-follow illustrated instructions. The portable launch system is designed to fly the entire line of AeroTech rockets. The Mantis Pad includes a 1/4" launch rod, but can be also used with 1/8" and 3/16" launch rods purchased separately.
Note: single use motors reloadable casings and reload kits not included, sold separately.
Includes Initiator Rocket Kit!
The Initiator is Aerotech's signature rocket kit. Are you itching to fly F and G motors? The Initiator is simply the best big rocket to build first. It features molded fins, beautiful color coordinated decals, and a no-wadding ejection system. An impressive 3 feet tall, the Initiator is one gorgeous rocket.
Specifications:
Length: 39"/99 cm
Diameter: 2.6"/6.7 cm
Weight (without motor): 14oz/400g
Fins: 3
Recommended RMS Motors:
E18-4W, E11-3J, E28-4T, F24-4W, F12-3J, F39-6T, F35-5W, E16-4W, E23-5T, F40-7W, F22-5J, F52-8T, G53-7FJ, G64-7W, G71-7R, G76-7G
Recommended Single-Use Motors:
E15-4W, E30-4T, F32-4T, F20-4W, F23-4FJ, F25-6W, F26-6FJ, F27-4R, F42-4T, F50-6T, G38-7FJ, G40-7W, G77-7R, G78-7G, G79-7W, G80-10T
Skill Level 3 Advanced
No. 89011
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html
