Aerotech Flying Model Rocket Kit Initiator AER 89011
Itching to fly F and G motors? The Initiator is simply the best big rocket to build first. It features molded fins, beautiful color coordinated
decals, and no-wadding ejection system. An impressive 3 feet tall, the Initiator is one gorgeous rocket. Also includes 1 Aluminum Machined Motor Retainer.
Specifications:
Length: 39”/99 cm
Diameter: 2.6”/6.7 cm
Weight (without motor): 14oz/400grams
Fins: 3
Skill Level PRO
No. 89011
Motors: 29mm
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
PRO Higher power rockets
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html
-
Aerotech Initiator
This is my second Initiator. First one has flown over a dozen times to over 2500 ft on G80 motors. Easy build, superb flyer, and beautiful lines.
